A tamper indicating self adhesive tape designed to visually deform when removal is attempted and leave a permanent dry peel residue on the application surface on removal.
Colors:
Label Lock™ Security Tape is designed to be used on most clean and dry surfaces:
Substrate: BOPP (Bi-axially Oriented PolyPropylene )
Adhesive: A high tack permanent pressure sensitive polymer based adhesive
Printed inks: A mixture of various ink chemistries and other components.
No special precautions needed. Do not inhale vapours if burnt.
Regulatory Information: Risk Phrases None required Safety Phrases None required
Ecological information: Not known to have any adverse environmental effects
Disposal considerations: Suitable methods of disposal are incinerators with energy recovery or in approved landfill sites in accordance with national and local regulations. Care should be taken to ensure compliance with national and local regulations.
Temperature resistance |
Use temperature: |
<-30⁰C to +70⁰C |
Storage temperature |
+5°C to 30°C (store dry) |
|
Application temperature |
-10⁰C to +45⁰C |
|
Humidity resistance |
not sensitive to humidity |
|
Water resistance |
withstands exposure to water at room temperature for 24 hours |
|
Shelf life |
1 year |
a) This product is not suitable for surface printing using a thermal transfer printer.
b) Sufficient pressure and dwell time is required to develop adhesion to ensure the the void message appears on removal or tampering. Stronger initial bonds can be made with firmer finger pressure on application.
c) A sufficient adhesive bond may not develop on all surfaces, particularly those with a low surface energy or surface contamination. The product must always be pre tested by the user in the intended application before actual use.
The statements made in this data sheet are the experience of using Label Lock™ in the field and the result of careful laboratory evaluations by trained staff employing FINAT and similar test methods. No guarantee can be made, however, as regards specific applications as conditions of use are different for each individual case. Full end-use testing should be undertaken to properly evaluate this product under specific conditions including the degree of security offered. It is recommended that the end user test samples from each roll of labels before use. This product is not guaranteed to be 100% tamper proof or leave a residue that can not be removed. The manufacturer does not accept any responsibility or liability direct or consequential for loss or damage caused as a result of using this product.