Type of seal: |
Pull-tight seal |
Locking mechanism: |
metal 4 tad collet |
Material: |
Polypropylene |
Dimensions, mm: |
440 х 19 х 8,23 |
Work length of the tie, mm: |
380 |
Tie's diameter, mm: |
2,4 |
Temperature range of use: |
from –60°С до + 80°С |
Type of marking: |
Laser |
Colors: |
Various (but the should be light to read the bar-code clearly) |
Numeration: |
7-digits number at the seal's body is duplicated at the insert. Consequent numbering. |
Security Seal «Arrow Lux», are plastic seals with numbers conforming to the ISO 17712:2013 standard (other ISO 17712 security seals are "Arrow"), is used to control unauthorized access and fraud when sealing containers, cars, trucks, rooms, warehouses, bags, safes, crates and others that need to be sealed with high security seals.
Colors:
а) on the containers — to pass the seal's tie through the ears of the container and in the sealing hole from the back side of the seal's flag (according to the arrow), tighten it till the stop with the spikes being inside. To pass the free end of the seal through two additional holes of the seal's flag.
б) on the bags To surround the seal's tie with the bag's neck. To pass the seal's tie through the sealing hole from the back side of the flag (according to the arrow) and tighten it till the stop with the spikes being inside (the spikes should stick deeply into the tissue of bag).
After strongly tightening the seal, to pass the free end consistently through two additional sealing holes of the seal's flag. It is necessary to use more strength to break the seal installed in this way.
To check the correctness of the installation — there shouldn't be any free space between the seal and the bag's neck. To fixate the seal's number in the appropriate register or if the bar-code/2D-code is present at the seal's flag and if the appropriate device is provided, to scan the code. The installation and removing of security seal «Arrow Lux» is by hands, without using any special devices