• Due to its design, the possibility of a repeated application is excluded. The process of installation allows the verification of the seal and the proper application.
• The installation does not require special abilities or equipment.
• The opening without leaving visible traces is impossible.
• The small dimensions and weight of the seal allows the sealing of small objects.

The deliver can be made in 2 ways:

1. Without marking – the body and the blocking device are packed separately.
2. Marking – the blocking device is inserted into the body by 2 click (not to the end).

The cable can be delivered according to the purchaser’s wish: on spools, partially installed on the seal or packed of 1000 pieces each with the appropriate size. The seals are packed in boxes of 5000 pieces./box.

If delivered disassembled:

• Insert the blocking device into the body not more than 2 clicks. To check the orientation verify the position of the holes on the body and on the blocking device.
• Pull the cable through the holes of the object to be sealed, and then insert both ends into the holes of the seal.
• Insert the blocking device to the end. The installation is considered finished.

If delivered semi-assembled:

• Pull the cables through the holes of the object to be sealed, then insert both ends through the holes of the seal.
• Insert the blocking device to the end. The installation is considered finished.