Type of seal:
metal 4 tad collet
220 х 19 х 8,23
Work length of the tie, mm:
Tie's diameter, mm:
Temperature range of use:
from –60°С to + 80°С
Type of marking:
Various (but the should be light to read the bar-code clearly)
7-digits number at the seal's body is duplicated at the insert. Consequent numbering.
Security Seal «Arrow», which is made in accordance to TU U 25.2-32700884-001:2006, is used for fixation of facts of unauthorized access and fraud to containers, cars, capacities, accommodations, bags, safe deposits, cases and etc., which do not need to be sealed with high security seals.
The work length of tie is 22 cm!
The additional holes are used for fixation of free part of security seal's tie. This makes the rate of tensile force higher.
The larger diameter of the tie - 2,4 mm!
The easiness of installation!
The seal's insert is made from the transparent material, which allows to control the locking mechanism's integrity visually!
Duplication of the seal's number at the insert.
The possibility to put the logotypes, text images, bar-codes and 2D-codes at the body (flag) of the seal!
The presence of the spikes for sealing the bags and packages!
The insert has the glowing effect in the UV-light! This allows to make a visual control of the locking mechanism's integrity and the correspondence of the number at the body and insert of the seal in the dark places or at the dark time of day.
а) on the containers — to pass the seal's tie through the ears of the container and in the sealing hole from the back side of the seal's flag (according to the arrow), tighten it till the stop with the spikes being inside. To pass the free end of the seal through two additional holes of the seal's flag.
b) on the bags To surround the seal's tie with the bag's neck.
To pass the seal's tie through the sealing hole from the back side of the flag (according to the arrow) and tighten it till the stop with the spikes being inside (the spikes should stick deeply into the tissue of bag). After strongly tightening the seal, to pass the free end consistently through two additional sealing holes of the seal's flag. It is necessary to use more strength to break the seal installed in this way. To check the correctness of the installation — there shouldn't be any free space between the seal and the bag's neck. To fixate the seal's number in the appropriate register or if the bar-code/2D-code is present at the seal's flag and if the appropriate device is provided, to scan the code. The installation and removing of security seal «Arrow Lux» is by hands, without using any special devices.